विस्तृत सूचना
features
Sturdy table model cutter for sectioning metals, ceramics and mineral samples
Make:Scientific technologies
Operation: Automatic
Mould Cylinder Sizes: 1", 1-1/4",1-1/2", 2" cylinder
Moulding material: Bakelite / Phenolic resin
Special features
Digital display with Temperature/Timer Controls
Feather touch control panel
Alarms for cycle completion
Automatic Single & Twin Disc Grinding/polisher
Make:Buehler
Platen Size : 8in [203mm]
Platen Speed :50-500rpm
Specimen holder :Round
VectorT LC Power Head
Model No : 60-1996-230 (230volts/50Hz)
Force style : Single
Head RPM Max :60
Specimen holders :1.5" and 1"
Max Single force : 50 Newton
Max no of specimens :4
b) Microhardness Tester
The fully automatic microhardness system of UHL make (UHL VMHT 104) has load range of 0.001 to 2 kg and operates with both Vicker's and Knoop's indenter.
c)Ball/Pin-on-disc sliding (controlled atmosphere) wear testing rig
Sliding wear testing as per ASTM standards to evaluate wear as well as friction characteristics under dry as well as controlled atmosphere environments.
Test conditions of set load, rotational speed, wear track, controlled humidity and pin/ball contact diameters depending on the required wear regime.
Drip-feed system can be used to evaluate tribo-corrosion properties.
Provisions to monitor temperature of controlled atmosphere chamber as well as in the close vicinity of pin/ball-holder are also available.
Windcom-2010 software integrated to the system facilitates to monitor record and evaluate wear and friction characteristics.
d)Pin-on-disc sliding wear testing rig
Sliding wear testing as per ASTM standards to evaluate wear as well as friction characteristics under dry as well as lubricating environments.
Test conditions of set load, rotational speed, wear track, lubricating and pin contact diameters depending on the required wear regime.
Windcom-2003 software integrated to the system facilitates to monitor, record and evaluate wear and friction characteristics.
Model and Make
BAINCUT UM & Chennai Metco pvt ltd
Specifications
e)Erichsen Testing Machine [Model RET:20/Sr.No:2K6/04]
Specifications
Width of the Sample: 70 to 90 mm
Thickness of Sample: 0.1 to 2mm
Least count of micrometric device: 0.01/0.02
f)Flexible Ceramic-Pad Pre-heating Equipment
Custom-designed pre-heating system facilitates in situ pre-heating of metal components during laser cladding process. Custom-designed heating pads be utilized for heating the steel components utilizing flexible ceramic pad coils fabricated. The equipment facilitates monitoring and control of pre-heating of jobs with specific temperature requirements. Appropriate sensors, circuit breakers, energy regulators and safety circuits are provided to ensure smooth and secure functioning. The system is useful for onsite pre-heating requirements for various coating processes.
g)Thermal Fatigue Resistance Test Rig
A specially designed computer controlled simulation test rig containing molten aluminium alloy (A380 with Si-7.5-9.5%) melt maintained at 660-680o C.
Surface temperature of the testing sample can be recorded online
A resistance heating furnace (3 kW) with 150 mm x 150 mm top opening and a graphite crucible of adequate size housed inside
The mechanical assembly consists of an overhead frame that carries a horizontal pneumatic cylinder that slides horizontally to and fro and another vertical cylinder) attached to the horizontal cylinder moves vertically up and down, on which, the sample holder is fixed. Test samples were alternatively dipped in Al-alloy (A380 with Si-7.5-9.5%) melt maintained at 660-680oC and commercially available water based die coat solution (DIECOAT 01, supplied by M/s Quality Technologies Pvt. Ltd., India) maintained at 30-40oC.
It is possible program cycle time and holding time.
Mould Cylinder Sizes: 1", 1-1/4",1-1/2", 2" cylinder